10 Function Characteristics of Smart Glass Film You Should Know

SWITCHABLE GLASS FILM SAMPLES SHOW.AVI Watch on Posterous

10 Function Characteristics of Smart Glass Film You Should Know
By Peter Shin
www.EVAfilms.com / www.CNCnext.com

1.
Brightness stability
Variable brightness individual. At any angles, the brightness of
projection is the same due to utilizing non-linear technology and
nano-technology.
2.
Viewing angle
The angel is very wide.
3.
Haze
The haze is very little, almost can not be made out by human eyes.
4.
Driving voltage
The driving voltage is very low to be good for safety.
5.
Thermal stability
There is no change while being touched by hand or heated by sunlight.
6.
Uniformity
Very uniformity due to new thermos-curing technology and
high-precision producing technology.
7.
Adhesion strength
The adhesive strength between crystal layer and ITO is uniformity and
balance and very strong, never delamination due to surface treatment
technology.

8.
Operational lifetime
Much prolonged. More than 100 million switch.

9.
UV stability without other protection
It’s till good after tested under UV radiation for 1 month. The
UV-RESISTANCE is high strengthened.
10
Moisture resistance
It’s can stay good in non-sealing condition. Very good moisture
resistance make it easier for storage and installation.

ALL RIGHT RESERVED BY:
(Product 1. )Ethylene-Vinyl Acetate EVA Interlayer Film for Safety
Laminated Glass
(Product 2.) China Solar EVA Film for Solar Panel Encapsulation
(Product 3.) China Smart Switchable Film for Privacy Glass, Smart Glass
www.evafilms.com / www.cncnext.com
cnc@cncnext.com/ eva@evafilms.com / benext77@hotmail.com /benext77@gmail.com

Published by cnc@cncGlass.com EVA film glass interlayer

Peter Lin Mail: cnc@cncGlass.com cnc@cncEva.com benext77@hotmail.com Whatsapp: 0086 15013829504 (watsapp) www.cncGlass.com www.cncEva.com CNC Glass Interlayer Super clear eva film Outdoor white eva film series Green tape for laminating, heating resistant Thermal cutter trimming eva glass edges