Blue silicone membrane, silicone blanket,

Silicone rubber, silicone sheet,silicone foils

For laminated glass glazing vacuuming

Peter Lin,  cnc@cncGlass.com,

cnc@cncEVA.com

Whatsapp:  0086 15013829504,

WeChat:  WeCan365

www.cncglass.com  www.cnceva.com

Silicone rubber sheet for glass industry is a key component of our company dedicated to supporting the glass vacuum laminated furnace according to market demand.

Laminated glass vacuum furnace uses vacuum principle, make the glass heated under vacuum conditions, with the atmospheric pressure, let the glass in the vacuum bag pressed to exclude air and unable to make bubbles, vacuum bag is under heating and vacuum pumped conditions to make two or more pieces of glass and EVA hot together.

Vacuum bag is a core part of glass vacuum laminated furnace, it makes up of two pieces of silicone rubber sheet and silicone sealing edge, silicone rubber sheet is a key component of the entire laminated furnace, its quality directly affects the quality of glass products.

thermal cutter, hot knife ,heating cutter,

heating knife, heating trimmer for eva pvb sgp lamination

Peter Lin, cnc@cncGlass.com,

cnc@cncEVA.com

Whatsapp: 0086 15013829504,

WeChat: WeCan365

www_cncGlass_com  www_cncEVA_com

The CNC THERMAL CUTTER the same as GTS thermal cutter is a thermal cutting tool for cleaning the edges of laminated glass by trimming the interlayer film that may have overflowed during the lamination process. The blade heats up to 500°C in seconds and uses heat to easily cut through any interlayer film including EVA, PVB or SGP. The cutter is supplied with four interchangeable blades for different cutting applications.

Peter Lin, cnc@cncGlass.com,

cnc@cncEVA.com

Whatsapp: 0086 15013829504,

WeChat: WeCan365

www_cncGlass_com  www_cncEVA_com

Edges Cleaning hot knife for SGP PVB laminated safety glass

Hand operated tool for cutting small quantities, for short-time operation only.

To cut and seal synthetic fiber products, such as ropes, bands, belts and fabric.  

Fitted with cutting foot, the combined tool is especially effective for cutting

synthetic fabric without cutting surface.

Controlling heating by switching the toll on and off

Peter Lin, cnc@cncGlass.com,

cnc@cncEVA.com

Whatsapp: 0086 15013829504,

WeChat: WeCan365

Hot Knife Electric Rope Cutter Cautions

Always operate the Hot Knife in well ventilated space.

Never burn off the excess residue on the Hot Knife blade. The blades will over heated and be warped.

Only operate Hot Knife when it is in contact with the insulation board

Keep hot blades away from skin, clothing and other flammable materials.

Allow blades to cool before handling. Hot Knife may cause injury or burns to exposed surfaces.

If the temperature inside the tool is too high, the unit will get hot and the internal thermal protectors will turn it off, after it cool, the Hot Knife will operate again.

SILICONE SHEET
SILICONE BLANKET
SILICONE FILM
FOR EVA PVB SGP GLASS VACUUMING
Peter Lin, cnc@cncGlass.com,
cnc@cncEVA.com
Whatsapp: 0086 15013829504,
WeChat: WeCan365
www.cncglass.com www.cnceva.com

Silicone rubber sheet for glass industry is a key component of our company dedicated to supporting the glass vacuum laminated furnace according to market demand.
Laminated glass vacuum furnace uses vacuum principle, make the glass heated under vacuum conditions, with the atmospheric pressure, let the glass in the vacuum bag pressed to exclude air and unable to make bubbles, vacuum bag is under heating and vacuum pumped conditions to make two or more pieces of glass and EVA hot together.
Vacuum bag is a core part of glass vacuum laminated furnace, it makes up of two pieces of silicone rubber sheet and silicone sealing edge, silicone rubber sheet is a key component of the entire laminated furnace, its quality directly affects the quality of glass products.

safety glass vacuuming silicone bag inside: telfon mesh

—————
If you want to order too, please contact
Peter Lin
Mail: cnc@cncGlass.com
Whatsapp: 0086 15013829504

EVAFORCE® SUPER CLEAR INTERLAYER FILM:for making architectural safety laminated glass


Super clear eva glass interlayer film
Outdoor white eva interlayer film series
Green tape for laminating sealing vacuuming, heating resistant
Thermal cutter trimming laminated glass edges remains by heating
www.cncGlass.com

1-EVAFORCE SUPER+ (COMPATIBLE) EVA INTERLAYER FILM

*Lowest melt viscosity
*Best compatibility with all kinds of uneven rough surface inserts
*Massive lamination, Largest sold quantity
*Great performance with affordable price
*Aim for architectural safety laminated glass
*Applied both indoor and outdoor

EVAFORCE® SUPER CLEAR INTERLAYER FILM:for making architectural safety laminated glass

2-EVAFORCE EXTREME EVA INTERLAYER FILM

*Less overflowing during vacuuming heating
*Strengthened safety mechanical properties
*Recommended for extreme environments, safety tempered glazing or curved glass laminating
*Applied both indoor and outdoor
*Replacing PVB Film

EVAFORCE® SUPER CLEAR INTERLAYER FILM:for making architectural safety laminated glass

3-WHITE EVA GLASS INTERLAYER FILM

Milky White/White Opaque EVA Film 0% Visible Light Transmittance
Sandblasting White/White Translucent EVA Film 65% Visible Light Transmittance
Super Milky White/Super White Opaque EVA Film 0% Visible Light Transmittance

EVAVISION®WHITE INTERLAYER FILM

4-Green PET Tape for fixing laminated glass to be ready for heating and vacuuming;

Green Tape Preventing Melted Eva Film Over Flowing Out of Laminated Glass Edges in the Oven

5-Thermal Cutter for trimming laminated glass edges overflowed remains;

Thermal Cutter to clean laminated glass edges overflowed remains: EVA, PVB, SGP etc.









polyester tape, high temperature tape, glass masking tape from Peter Lin on Vimeo.

CNC Silicone Vacuum Bag EVA laminating furnace EVA Glass Laminating Accessories from Peter Lin on Vimeo.

silicone-tube-for-safety-glazing-lamination-vacuuming-38

silicone-tube-for-safety-glazing-lamination-vacuuming-39

silicone-tube-for-safety-glazing-lamination-vacuuming-40

silicone-tube-for-safety-glazing-lamination-vacuuming-41

silicone-tube-for-safety-glazing-lamination-vacuuming

Good morning Peter

We need to purchase some more silicone sheet to repair our laminating machine.

We require two pieces @ 2800 x 6500 x 3mm thick. We have previously bought this from you in clear silicone but was wandering if you had it in blue?

Could you give me a quotation please.

Many thanks

—————
If you want to order too, please contact Peter Lin
Mail: cnc@cncGlass.com
Whatsapp: 0086 15013829504

EVAFORCE® SUPER CLEAR INTERLAYER FILM:for making architectural safety laminated glass


Super clear eva glass interlayer film
Outdoor white eva interlayer film series
Green tape for laminating sealing vacuuming, heating resistant
Thermal cutter trimming laminated glass edges remains by heating
www.cncGlass.com
www.cncEva.com
www.cncnext.com

Green Tape Preventing Melted Eva Film Over Flowing Out of Laminated Glass Edges in the Oven

1-EVAFORCE SUPER+ (COMPATIBLE) EVA INTERLAYER FILM

*Lowest melt viscosity
*Best compatibility with all kinds of uneven rough surface inserts
*Massive lamination, Largest sold quantity
*Great performance with affordable price
*Aim for architectural safety laminated glass
*Applied both indoor and outdoor

EVAFORCE® SUPER CLEAR INTERLAYER FILM:for making architectural safety laminated glass

2-EVAFORCE EXTREME EVA INTERLAYER FILM

*Less overflowing during vacuuming heating
*Strengthened safety mechanical properties
*Recommended for extreme environments, safety tempered glazing or curved glass laminating
*Applied both indoor and outdoor
*Replacing PVB Film

EVAFORCE® SUPER CLEAR INTERLAYER FILM:for making architectural safety laminated glass

3-WHITE EVA GLASS INTERLAYER FILM

Milky White/White Opaque EVA Film 0% Visible Light Transmittance
Sandblasting White/White Translucent EVA Film 65% Visible Light Transmittance
Super Milky White/Super White Opaque EVA Film 0% Visible Light Transmittance

EVAVISION®WHITE INTERLAYER FILM

4-Green PET Tape for fixing laminated glass to be ready for heating and vacuuming;

Green Tape Preventing Melted Eva Film Over Flowing Out of Laminated Glass Edges in the Oven

5-Thermal Cutter for trimming laminated glass edges overflowed remains;

Thermal Cutter to clean laminated glass edges overflowed remains: EVA, PVB, SGP etc.






polyester tape, high temperature tape, glass masking tape from Peter Lin on Vimeo.

CNC Silicone Vacuum Bag EVA laminating furnace EVA Glass Laminating Accessories from Peter Lin on Vimeo.

[slideboom id=1591895&w=425&h=370]

blades-tips-heads-of-glass-edges-cleaning-hot-knife-14

blades-tips-heads-of-glass-edges-cleaning-hot-knife-15

blades-tips-heads-of-glass-edges-cleaning-hot-knife-1

Dear Peter,

Please send us quotation for the following items:

2 rolls EVAFORCE SUPER CLEAR+ 0.38mm*2300mm*100m/roll

2 rolls EVAFORCE SUPER CLEAR+ 0.76mm*2300mm*50m/roll

200 rolls Green tape 25mm*66m/roll

200 rolls green tape 35mm*66m/roll

FOR SAMPLES

EVAFORCE EXTREME 0.38mm *2300mm *1m

Milky White OUTDOOR 0.38mm * 2000mm * 1m

SUPER Milky White OUTDOOR 0.38mm * 2000mm * 1m

Sandblasting White OUTDOOR 0.38mm * 2000mm * 1m

Cool Jade White OUTDOOR 0.38mm * 2000mm * 1m

Black Opaque 0.38mm * 2000mm * 1m

Deep Red 0.38mm * 2000mm * 1m

Lemon Yellow 0.38mm * 2000mm * 1m

Orange Yellow 0.38mm * 2000mm * 1m

Blue 0.38mm * 2000mm * 1m

Green 0.38mm * 2000mm * 1m

Grass green 0.38mm * 2000mm * 1m

Pink 0.38mm * 2000mm * 1m

Purple 0.38mm * 2000mm * 1m

Tea Color 0.38mm * 2000mm * 1m

Grey 0.38mm * 2000mm * 1m

Royal Blue 0.38mm * 2000mm * 1m

Thanks.

Sincerely yours,

—————
If you want to order too, please contact Peter Lin
Mail: cnc@cncGlass.com
Whatsapp: 0086 15013829504

EVAFORCE® SUPER CLEAR INTERLAYER FILM:for making architectural safety laminated glass


Super clear eva glass interlayer film
Outdoor white eva interlayer film series
Green tape for laminating sealing vacuuming, heating resistant
Thermal cutter trimming laminated glass edges remains by heating
www.cncGlass.com
www.cncEva.com
www.cncnext.com

Green Tape Preventing Melted Eva Film Over Flowing Out of Laminated Glass Edges in the Oven

1-EVAFORCE SUPER+ (COMPATIBLE) EVA INTERLAYER FILM

*Lowest melt viscosity
*Best compatibility with all kinds of uneven rough surface inserts
*Massive lamination, Largest sold quantity
*Great performance with affordable price
*Aim for architectural safety laminated glass
*Applied both indoor and outdoor

EVAFORCE® SUPER CLEAR INTERLAYER FILM:for making architectural safety laminated glass

2-EVAFORCE EXTREME EVA INTERLAYER FILM

*Less overflowing during vacuuming heating
*Strengthened safety mechanical properties
*Recommended for extreme environments, safety tempered glazing or curved glass laminating
*Applied both indoor and outdoor
*Replacing PVB Film

EVAFORCE® SUPER CLEAR INTERLAYER FILM:for making architectural safety laminated glass

3-WHITE EVA GLASS INTERLAYER FILM

Milky White/White Opaque EVA Film 0% Visible Light Transmittance
Sandblasting White/White Translucent EVA Film 65% Visible Light Transmittance
Super Milky White/Super White Opaque EVA Film 0% Visible Light Transmittance

EVAVISION®WHITE INTERLAYER FILM

4-Green PET Tape for fixing laminated glass to be ready for heating and vacuuming;

Green Tape Preventing Melted Eva Film Over Flowing Out of Laminated Glass Edges in the Oven

5-Thermal Cutter for trimming laminated glass edges overflowed remains;

Thermal Cutter to clean laminated glass edges overflowed remains: EVA, PVB, SGP etc.






polyester tape, high temperature tape, glass masking tape from Peter Lin on Vimeo.

CNC Silicone Vacuum Bag EVA laminating furnace EVA Glass Laminating Accessories from Peter Lin on Vimeo.

[slideboom id=1591895&w=425&h=370]

blades-tips-heads-of-glass-edges-cleaning-hot-knife-14

blades-tips-heads-of-glass-edges-cleaning-hot-knife-15

blades-tips-heads-of-glass-edges-cleaning-hot-knife-1

Dear Peter,

We are interested to know more about the CNC – SMART SELF ADHESIVE Film.

Kindly let us know the following:

1) What is the maximum sizes available?

2) What is the delivery period?

3) What is the price ?

4) Can we have a sample to test ?

Best regards.

—————
If you want to order too, please contact Peter Lin
Mail: cnc@cncGlass.com
Whatsapp: 0086 15013829504

EVAFORCE® SUPER CLEAR INTERLAYER FILM:for making architectural safety laminated glass


Super clear eva glass interlayer film
Outdoor white eva interlayer film series
Green tape for laminating sealing vacuuming, heating resistant
Thermal cutter trimming laminated glass edges remains by heating
www.cncGlass.com
www.cncEva.com
www.cncnext.com

Green Tape Preventing Melted Eva Film Over Flowing Out of Laminated Glass Edges in the Oven






polyester tape, high temperature tape, glass masking tape from Peter Lin on Vimeo.

CNC Silicone Vacuum Bag EVA laminating furnace EVA Glass Laminating Accessories from Peter Lin on Vimeo.

[slideboom id=1591895&w=425&h=370]

blades-tips-heads-of-glass-edges-cleaning-hot-knife-14

blades-tips-heads-of-glass-edges-cleaning-hot-knife-15

blades-tips-heads-of-glass-edges-cleaning-hot-knife-1