thermal cutter, hot knife ,heating cutter,

heating knife, heating trimmer for eva pvb sgp lamination

Peter Lin, cnc@cncGlass.com,

cnc@cncEVA.com

Whatsapp: 0086 15013829504,

WeChat: WeCan365

www_cncGlass_com  www_cncEVA_com

The CNC THERMAL CUTTER the same as GTS thermal cutter is a thermal cutting tool for cleaning the edges of laminated glass by trimming the interlayer film that may have overflowed during the lamination process. The blade heats up to 500°C in seconds and uses heat to easily cut through any interlayer film including EVA, PVB or SGP. The cutter is supplied with four interchangeable blades for different cutting applications.

Peter Lin, cnc@cncGlass.com,

cnc@cncEVA.com

Whatsapp: 0086 15013829504,

WeChat: WeCan365

www_cncGlass_com  www_cncEVA_com

Edges Cleaning hot knife for SGP PVB laminated safety glass

Hand operated tool for cutting small quantities, for short-time operation only.

To cut and seal synthetic fiber products, such as ropes, bands, belts and fabric.  

Fitted with cutting foot, the combined tool is especially effective for cutting

synthetic fabric without cutting surface.

Controlling heating by switching the toll on and off

Peter Lin, cnc@cncGlass.com,

cnc@cncEVA.com

Whatsapp: 0086 15013829504,

WeChat: WeCan365

Hot Knife Electric Rope Cutter Cautions

Always operate the Hot Knife in well ventilated space.

Never burn off the excess residue on the Hot Knife blade. The blades will over heated and be warped.

Only operate Hot Knife when it is in contact with the insulation board

Keep hot blades away from skin, clothing and other flammable materials.

Allow blades to cool before handling. Hot Knife may cause injury or burns to exposed surfaces.

If the temperature inside the tool is too high, the unit will get hot and the internal thermal protectors will turn it off, after it cool, the Hot Knife will operate again.

Published by cnc@cncGlass.com EVA film glass interlayer

Peter Lin Mail: cnc@cncGlass.com cnc@cncEva.com benext77@hotmail.com Whatsapp: 0086 15013829504 (watsapp) www.cncGlass.com www.cncEva.com CNC Glass Interlayer Super clear eva film Outdoor white eva film series Green tape for laminating, heating resistant Thermal cutter trimming eva glass edges