EVA Film Glass laminating machine operation cautions(2)

This post is also about how to laminating glass with withEVA(Ethylene-vinyl acetate) Interlayer Film.

EVA(Ethylene-vinyl acetate) Interlayer Film glass laminating machine

5. The silicon bag only can stand 20% of ordinary rubber in scratching and pulling resistance, so please be careful when put the pre-laminated glass withEVA(Ethylene-vinyl acetate) Interlayer Film inside the silicon bag, which can avoid the edges of the pre-laminated glass hurt the silicon bag and cause the silicon bag  leaking. When the temperature is high, better not move the silicon bag, because at high temperature, the silicon bag is easy to break.

6.Please frequently change the oil of the vacuuming pump. When the humidity is high, the oil will absorb some moisture and become white, then the vacuuming ability would be affected. You can let the oil and moisture be still, then the moisture will separate from the oil, and you can recycle the oil.

7.Please put the vacuuming pump in a dry and ventilating place, which would help the release of heat of pump.

All rights reserved to http://glasshacks.com.

Published by cnc@cncGlass.com EVA film glass interlayer

Peter Lin Mail: cnc@cncGlass.com cnc@cncEva.com benext77@hotmail.com Whatsapp: 0086 15013829504 (watsapp) www.cncGlass.com www.cncEva.com CNC Glass Interlayer Super clear eva film Outdoor white eva film series Green tape for laminating, heating resistant Thermal cutter trimming eva glass edges