Bubbles of laminated glass with Polyvinyl Butyral PVB interlayer film

Bubbles of laminated glass with Polyvinyl Butyral PVB interlayer film

Bubbles of laminated glass with Polyvinyl Butyral PVB interlayer film
Condition:
Small bubbles at the edges of safety laminated glass with Polyvinyl Butyral PVB interlayer film.

Reason:
1) When the autoclave decreasing the pressure, although the temperature detector shows the temperature is under 50 degree, due to the glass thickness and square, sometimes, the glass temperature is still higher than 50 degree, so if the pressure is low, some air will absorbed into the glass edges.

Solution:
Even when the temperature detector shows the temperature is lower than  50 degree, don’t decrease the pressure too hurry, wait for some minutes, make sure real the temperature of the glass is lower than 50 degree. If the laminated glass is thick, or many layers, or large square, then the waiting time should be a little longer.

2)The tempered glass is not high quality enough, and the plainness of the tempered glass is not good enough.

Solution:
Choose better quality tempered glass, or use the thicker Polyvinyl Butyral PVB interlayer film.

3) Maybe the detector of the temperature and pressure is not correct. Make sure the temperature and pressure parameters is correct .

If you need any help in China to find the informations of glass lamination materials,  products, manufacturers, Suppliers, Offers, Please feel free to contact us, we will answer you in 24hours.

Mail: helps@glasshelps.com

Published by cnc@cncGlass.com EVA film glass interlayer

Peter Lin Mail: cnc@cncGlass.com cnc@cncEva.com benext77@hotmail.com Whatsapp: 0086 15013829504 (watsapp) www.cncGlass.com www.cncEva.com CNC Glass Interlayer Super clear eva film Outdoor white eva film series Green tape for laminating, heating resistant Thermal cutter trimming eva glass edges