4 key Advantages of Ethylene-vinyl acetate EVA Interlayer lamination Film(EVASKY)

4 key Advantages of Ethylene-vinyl acetate EVA Interlayer lamination Film (EVASKY)


I read a newsletter from the BRIDGESTONE’S website.

BRIDGESTONE summarize 4 key advantages of Ethylene-vinyl acetate EVA Interlayer lamination Film, by comparing to Polyvinyl Butyral PVB Interlayer Film.

Of course, the comparison is based on  bthe EVASKY that produced by BRIDGESTONE herself, but i was wondering, how about the other Ethylene-vinyl acetate EVA Interlayer lamination Film MANUFACTURERS in China, does their EVA FILM will have the same or at least similar advantages by comparing to PVB INTERLAYER FILM.

The four key advantages of Ethylene-vinyl acetate EVA Interlayer lamination Film tested by BRIDGESTONE are:

1. Ethylene-vinyl acetate EVA Interlayer lamination Film(EVASKY) has better adhesion for many kinds of materials, like PET FILM, GLASS, SI CELL, ALUMINIUM, COPPER, POLYCARBONATE.

2. Ethylene-vinyl acetate EVA Interlayer lamination Film(EVASKY) has better high temperature resistance, and humidity resistance.  The high temperature resistance is tested under 85 degrees Celsius and 85% relative humidity for 2000 hours.

3.Ethylene-vinyl acetate EVA Interlayer lamination Film(EVASKY) has less posibility for causing bubbles and delamination, because it’s viscosity is lower than pvb interlayer glass lamination film.

4.Ethylene-vinyl acetate EVA Interlayer lamination Film(EVASKY) is better at aging resistance. After tested after 85 degrees Celsius and 85% relative humidity, the laminated glass with Ethylene-vinyl acetate EVA Interlayer lamination Film(EVASKY) is keep transparent, while the laminated glass with pvb interlayer film appers haze.

All rights reserved by Silicone Vacuuming Bag /Sheet  for EVA Glass Laminating Machine / Solar EVA Photovoltaic Panel Encapsulations China Ucolin Manufacturer (uc@ucolin.com / www.ucolin.com /umewe360@gmail.com)

If you want to learn more, please go to the BRIDGESTONE’S WEBSITE:

http://www.bridgestone.com/products/diversified/evasky/whats_evasky.html

PVS(Ethylene-vinyl acetate EVA) Interlayer Film For Safety Laminated Glass For Construction Project

PVS(Ethylene-vinyl acetate EVA) Interlayer Film For Safety Laminated Glass For Construction Project

=Excellent transparency properties,above processing temperature 130℃ can provide perfect transmittance.

=Tensile breaking strength had a greatly improved, close to the strength of PVB,the finished products are more secure, reliable

=Reducing the mobility,,less film will flow out cause by the high pressure , thus ensuring the folder layer thickness will not change much.

=Excellent UV impediment properties, to resist 99.9% of UV, thus ensuring the safety of indoor environments.

=High aging-retardant,can keep adhesion well and will not turn yellow longer than 20 years in outdoor.

=Nice resistance to water and humidity,suitable for cutting and grinding.

=Pure white,no black spot,high yellow resistance and long-term storage.

=Can be used with acidity glass glue, meet the construct requirements.

Guangzhou Huichi Glass technology Co., LTD, specializes in research&development, production and sales of material and equipment of glass post processing technology. The company pursuring “strives for the survival by the quality, beg the development with the prestige”, and enjoy a wide good reputation with the excellent quality and favorable price of the products for years.

Culture is the life line for the sustainable development of the enterprise.HuiChi highly values the construction of corporate culture ,and delivers the values of the enterise and philosophy of operation to its employees invisibly and gradually so as to build up an army of employees with great cohesive strengh and loyalty.It is the enthusiasm and creativity displayed by every person of HuiChi that have provided inexhaustible impetus for the development of the enterpeise .

The main products of ours:

EVA FILM FOR LAMINATED GLASS

DECORATIVE FILM ,INERTION MATERIAL FOR LAMINATED GLASS

GLASS VACCUM HEATING &LAMINATED MACHINE

GLASS CHEMICAL SERIES

GLASS MAHINERY AND ACESSORIES SERIES

VE EN Films for Outdoor Safety Construction Laminated Glass

● Who Are We?

Foshan E.N Plastic Product Co., Ltd. is a high-tech enterprise specialized in research and development (R&D), manufacture, and sale of EVA films for safety laminated glass.

● How Good of Our Products?

(1.)Exporting to EUROPEAN market 3 container every month.

(2.) Conforming to the requirements in GB9962-1999 Safety Laminated Glass Standard

(3.) Successfully passed the inspections of: China National Safety Glass&Quartz Glass Test Center

(4.) Insured by People’s Insurance Company of China

● What Can We Provide for You?

(1.) VE EN Films for Outdoor Safety Construction Laminated Glass

(2.) Black and White EN EVA Films for Decoration Laminated Glass

(3.) Colorful EN EVA Films for Decoration Laminated Glass

Kyle Lin

International Trade Manager, Foshan China E.N Plastic Product Co., Ltd.

evafilmchina@gmail.com

Clean Glass Lamination Ethylene-vinyl acetate EVA Interlayer Film

Clean Glass Lamination Ethylene-vinyl acetate EVA Interlayer Film

by cnc@cncglass.com

If you in you are in high-tech glass industry, you may require great clean laminated glass.

To manufacture great clean laminated glass, you will need great clean Ethylene-vinyl acetate EVA Interlayer Film.

There are many parameters is leading to great clean Ethylene-vinyl acetate EVA Interlayer Film.

1. Raw Ethylene-vinyl acetate EVA materials. Is it the original brand-new materials, or is it recycled from some eva craps.

2. The Ethylene-vinyl acetate EVA Interlayer Film manufacturing environment, does Ethylene-vinyl acetate EVA Interlayer Film is produced in the dust-less closed clean workshop? How high of the purification of the producing workshop?

3. Most Ethylene-vinyl acetate EVA Interlayer Film manufacturers put an PE membrane inside the Ethylene-vinyl acetate EVA Interlayer Film to isolate the Ethylene-vinyl acetate EVA Interlayer Film to make sure the Ethylene-vinyl acetate EVA Interlayer Film is not sticked together and easy for laminating procedure.

But the PE membrane is also would bring some dust in to the Ethylene-vinyl acetate EVA Interlayer Film. Because most PE membrane is not produced in purified workshop, and the static electricity of the PE will easily absorbed the dust.

4. So don’t use the PE membrane side theEthylene-vinyl acetate EVA Interlayer Film. And use the vacuumed package for the Ethylene-vinyl acetate EVA Interlayer Film and also packed in the wooden box to make sure the Ethylene-vinyl acetate EVA Interlayer Film is not under great stress.

cnc@cncglass.com

eva@evafilms.com

China EN Interlayer Technology Co., Ltd. (www.CNCglass.com www.EVAFilms.com ) is specialized in research and development (R&D) of Ethylene-vinyl acetate EVA Interlayer Film for Architectural and Auto Safety Laminated Glass. We are keeping making progress to be more professional in EVA Interlayer Film manufacturing. We believe that only being professional can serve our customers best!

Ethylene-vinyl acetate EVA Interlayer FilmFeatures of Our Products

Foshan China E&N Film Technology Co., Ltd.
Web:  www.en168.com   Mail: en@en168.com   evafilmchina@gmail.com
Tel: +86-757 8118 1117   Fax: +86 757 8558 3938  Mob: +86 13802646686

Ethylene-vinyl acetate EVA Interlayer FilmFeatures of Our Products

1.) Clean and smooth, having no black dots, can be stored for a long time without becoming yellow.

2.) Our films are ultra-transparent and the transmittance is up to 90.6 %( tested by SGS-CSTC Standard).

3.) Great conglutination. The film are becoming adhesive at the temperature about 100 degrees.

4.) Improved by eliminating static and tension of the films to forbid the glass self-bursting.

5.) Our films reduce the leaking glue during the laminated processing.

6.) Our films have past the tests of “High Temperature Resistance, Humidity Resistance, Radiation Resistance, Ball Impact Peeling Test and Shot Bag Impact Test”.

Ethylene-vinyl acetate EVA Interlayer Film Processing Procedure

1.) After the glass with inserted film well prepared, please put wire nettings around the pump hole to help vacuumizing.

2.) Combine the Silica Gel Bag. Activate vacuum pump for 2-3min till the vacuum value reach 0.95Mpa. Then start heating.

If you need any help in China to find the informations of glass lamination materials, products, manufacturers, Suppliers, Offers, Please feel free to contact us, we will answer you in 24hours.

Mail: helps@glasshelps.com

China GlassHepls Service Center of Glass Materials Purchase

Ethylene-vinyl acetate EVA Interlayer Film Manufacturers

Ethylene-vinyl acetate EVA Interlayer Film Manufacturers:

Foshan E.N Plastic Product Co., Ltd. is a high-tech enterprise specialized in research and development (R&D), manufacture, and sale of EVA films for laminated glass. E.N has a senior professional high- tech R&D team and has cultivated a group of highly-skilled technical personnel. Our VE, EN films are for safety laminated glass in outdoor construction engineering, automotive glass, Bullet-proof glass etc. Our decoration EVA films are often combined with PET dorsal membrane, the portrait painting paper (PP, PVC), silk, wire, paper, glass fiber, fabric etc.; 20kinds of colors available for you to choose which can be used to produce decorating glass of high taste and full of artistic sense mainly used in entertainment hotel, square, sliding door, bathroom etc.

1. Quality Guaranteed in E.N

The EN (EVA) films all conform to the requirements in GB9962-1999 Laminated glass standard and are insured by People’s Insurance Company of China.

Our EVA films have successfully passed the inspections of:

1.) China National Safety Glass&Quartz Glass Test Center.

(NO.:WT20090164)

2.). Jianke Quality of Building Engineering Detection Center of Guangdong

(NO.: B2008(11)0114)

3.). SGS-CSTC Standard Technical Services Co. Ltd. Test Center(NO.: GZMR090405471)

2. The Three Core Technologies of E.N

E.N has earned sound reputation from its customers for high-quality products, which due to the three core technologies.

●The Tower-Type Double Rotor Sub-High Level Mixing Technique

●Nanotechnology

●Adhesion Adjustment Technology

www.en168.com

If you need any help in China to find the informations of glass lamination materials, products, manufacturers, Suppliers, Offers, Please feel free to contact us, we will answer you in 24hours.

Mail: helps@glasshelps.com

China GlassHepls Service Center of Glass Materials Purchase